squid传统代理和透明代理

缓存代理概述

web代理的工作机制:
缓存网页对象,减少重复请求

squid传统代理和透明代理

代理的基本类型

传统代理:适用于Internet,需明确指定服务端
透明代理:客户机不需要指定代理服务器的地址和端口,是通过默认路由,防火墙将web重定向给代理

使用代理的好处

提高web访问速度
隐藏客户机的真实IP地址

一,传统代理

实验环境

squid服务器 192.168.13.179
web服务器 192.168.13.151
client测试机192.168.13.135

1,在squid服务器上安装squid代理服务器

[root@squid ~]# mkdir /abc
[root@squid ~]# mount.cifs //192.168.100.3/LNMP-C7 /abc/   ##挂载
[root@squid ~]# cd /abc/
[root@squid abc]# tar zxvf squid-3.4.6.tar.gz -C /opt  ##解压
[root@squid abc]# yum install gcc gcc-c++ make -y  ##安装环境组件
[root@squid abc]# cd /opt/squid-3.4.6
[root@squid squid-3.4.6]# ./configure 
--prefix=/usr/local/squid   ##安装路径
--sysconfdir=/etc    ##配置文件目录
--enable-arp-acl    ##支持acl访问控制列表
--enable-linux-netfilter    ##支持网络筛选
--enable-linux-tproxy    ##支持透明
--enable-async-io=100    ##io优化
--enable-err-language="Simplify_Chinese"    ##报错显示简体中文
--enable-underscore 
--enable-poll 
--enable-gnuregex   ##支持正则表达
[root@squid squid-3.4.6]# make && make install   ##编译安装
[root@squid squid-3.4.6]# ln -s /usr/local/squid/sbin/* /usr/local/sbin/  ##便于系统识别
[root@squid squid-3.4.6]# useradd -M -s /sbin/nologin squid   ##创建系统用户
[root@squid squid-3.4.6]# chown -R squid.squid /usr/local/squid/var/  ##给目录所有文件属主属组权限

2,修改squid配置文件,并优化启动项

[root@squid squid-3.4.6]# vim /etc/squid.conf   ##修改squid配置文件
# And finally deny all other access to this proxy
http_access allow all   ##添加此项
#http_access deny all ##注释,允许终端访问
# Squid normally listens to port 3128
http_port 3128
cache_effective_user squid   ##指定用户squid
cache_effective_group squid ##指定组
[root@squid squid-3.4.6]# squid -k parse ##检查配置文件语法
[root@squid squid-3.4.6]# squid -z  ##初始化缓存目录
[root@squid squid-3.4.6]# squid  ##开启服务
[root@squid squid-3.4.6]# netstat -ntap | grep 3128  ##查看squid端口
[root@squid squid-3.4.6]# cd /etc/init.d/
[root@squid init.d]# vim squid    ##编辑service启动squid的脚本
#!/bin/bash
#chkconfig: 2345 90 25
PID="/usr/local/squid/var/run/squid.pid"   ##PID文件进程号
CONF="/etc/squid.conf"   ##主配置文件
CMD="/usr/local/squid/sbin/squid"   ##启动命令
case "$1" in
start)
netstat -ntap | grep squid &> /dev/null
if [ $? -eq 0 ]
then
echo "squid is running"
else
echo "正在启动 squid...."
$CMD
fi
;;
stop)
$CMD -k kill &> /dev/null   ##关闭squid
rm -rf $PID &> /dev/null    ##删除PID文件
;;
status)
[ -f $PID ] &> /dev/null
if [ $? -eq 0 ]
then
netstat -ntap | grep squid
else
echo "squid is not running"
fi
;;
restart)
$0 stop &> /dev/null
echo "正在关闭 squid..."
$0 start &> /dev/null
echo "正在启动 squid..."
;;
reload)
$CMD -k reconfigure  ##重载配置文件
;;
check)
$CMD -k parse   ##检查语法
;;
*)
echo "用法:$0{start|stop|reload|status|check|restart}"
;;
esac
[root@squid init.d]# chmod +x squid   ##给执行权限
[root@squid init.d]# chkconfig --add squid   ##添加到service管理中
[root@squid init.d]# chkconfig --level 35 squid on  ##开机自启

3,设置传统代理配置

[root@squid init.d]# vim /etc/squid.conf  ##修改主配置文件
# Squid normally listens to port 3128
http_port 3128
cache_mem 64 MB   ##内存空间大小
reply_body_max_size 10 MB  ##允许下载最大文件大小
maximum_object_size 4096 KB   ##允许保存缓存空间最大对象大小
[root@squid init.d]# service squid restart
[root@squid init.d]# iptables -L  ##查看表内容
[root@squid init.d]# iptables -F  ##清空表缓存
[root@squid init.d]# setenforce 0
[root@squid init.d]# iptables -I INPUT -p tcp --dport 3128 -j ACCEPT ##允许3128端口
[root@squid init.d]# service squid reload  ##重载配置文件

4,在web服务器上安装http服务

[root@web ~]# systemctl stop firewalld.service   ##关闭防火墙
[root@web ~]# setenforce 0
[root@web ~]# yum install httpd -y  ##安装web服务
[root@web ~]# systemctl start httpd.service

使用client访问web网页

squid传统代理和透明代理

[root@web ~]# cd /etc/httpd/logs/  ##查看日志文件
[root@web logs]# vim access_log  ##此时是135地址访问的

5,修改客户机浏览器代理设置

squid传统代理和透明代理

##重新利用客户机访问web服务器
[root@web ~]# cd /etc/httpd/logs/  ##查看日志文件
[root@web logs]# vim access_log  ##此时是179代理服务器访问的

二,透明代理

实验拓扑

squid传统代理和透明代理

实验环境

squid服务器 ens33:192.168.13.184
ens36:192.168.10.1 (仅主机模式)
web服务器 192.168.13.151
client 192.168.10.10  (仅主机模式)

1,在squid服务上添加一块网卡,并设置ip地址

squid传统代理和透明代理

[root@squid ~]# cd /etc/sysconfig/network-scripts/
[root@squid network-scripts]# cp -p ifcfg-ens33 ifcfg-ens36
[root@squid network-scripts]# vim ifcfg-ens36  ##修改ens36ip信息
BOOTPROTO=static
##删除uuid修改33为36
IPADDR=192.168.10.1
NETMASK=255.255.255.0
[root@squid network-scripts]# service network restart   ##重启网络服务
[root@squid network-scripts]# vim /etc/sysctl.conf   ##开启路由转发
net.ipv4.ip_forward=1
[root@squid network-scripts]# sysctl -p   ##加载

2,在web服务器上指定静态路由

[root@web ~]# route add -net 192.168.10.0/24 gw 192.168.13.184  ##添加静态路由

3,在squid服务器上设置透明代理

[root@squid network-scripts]# vim /etc/squid.conf   ##设置配置文件
http_port 192.168.10.1:3128 transparent   ##设置透明代理
cache_effective_user squid
cache_effective_group squid
[root@squid network-scripts]# service squid stop  ##关闭开启squid服务
[root@squid network-scripts]# service squid start
[root@squid network-scripts]# iptables -F  ##清空表缓存
[root@squid network-scripts]# iptables -t nat -F
[root@squid network-scripts]# iptables -t nat -I PREROUTING -i ens36 -s 192.168.10.0/24 -p tcp --dport 80 -j REDIRECT --to 3128
##定义规则入口ens36,80端口重定向到3128
[root@squid network-scripts]# iptables -t nat -I PREROUTING -i ens36 -s 192.168.10.0/24 -p tcp --dport 443 -j REDIRECT --to 3128
##https443端口
[root@squid network-scripts]# iptables -I INPUT -p tcp --dport 3128 -j ACCEPT
##允许3128端口访问

4,用测试机测试

squid传统代理和透明代理

5,在web服务器上查看访问日志文件

[root@web ~]# cd /var/log/httpd/
[root@web httpd]# vim access_log   ##查看访问日志信息

squid传统代理和透明代理

##此时是184访问的并不是测试机的地址访问的

谢谢阅读!!